Home Coating Engine Work Equipped Rides Contact



HorsePower Farm

Horizontal separator



Top End Machining
Labor Only


* 3 Angle Valve Job  ---------   call for price
-Disassemble                             
-Clean                                       
-Reface 16 valves + 16 seats     
-Replace valve seals                  
-Leak test                                 
-Reassemble                             



* Surface head - check squareness

-Up to .010"  --------------   call for price
-.010 to .020"  -------------   call for price
-.021 to .030"  -------------   call for price
 -.031" and up  --------------   call for price



* Buff scored rocker pads

      -LS, CRV, H23, DOHC ZC, D16a1   --  call for price
        -D15, D16, F22, B16, B17, B18, H22 -- call for price



*Port + Valvejob + Surface  --    Price Varies

-No Stages                                  
-Every head is my best work!      
    -From intake to chamber to exhaust.
-B/D/F/H/K                                



*Full Porting Jobs     ---     call for price

-Disassembly                               
-Inspecting                                  
-Glass beading                             
-Several Jet Washings                  
-Thread Chasing Full Chamber     
-Runner Porting                           
-Resurface/mill up to .030"          
-Angle or Radius valvejob            
                                                                      (using Newen/Goodson Carbide inserts on Carbide pilots precision valve)
         -Reface performed on centerless refacer
                        (stock vavles, or install replacement valves)



*Chamber and Valvejob   --    call for price

              -Resurfacing of intake/exhaust/vtec solenoid
-Flanges CC Chambers                
-Final cleaning                               
-Reassembly                                 
-Valvejob is blended                     
                ( .750" back into the throats on each side)



Here are some photos of recent work done by The HorsePower Farms.   (updated periodically)

b16 turbo experimental head exhaust ports Checking installed heights Competition Valve Job on Sunnen VGS-20 (Harley Evo)
Dart Pro 1 heads competition valve grind blending as cast port Exhaust ports b21a1 prelude f22b1 sohc modded vs stock port
Intake ports b21a1 prelude Port matched gsr blox intake manifold Porting mopar stage 3 housing
Pro Stock Pulling Truck cyl head (465cfm @ .830 lift) assembled Worked over 2.2 sohc honda for boost street port competition valve grind b21a1 prelude
Pro Stock Pulling Truck cyl head (465cfm @ .830 lift)

Horizontal separator







Valid XHTML 4.01 Transitional!

© Copyright 2008 by The HorsePower Farm.    All rights reserved